Fillauer Aeris Performance 2 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 12

Fillauer Aeris
Performance 2 Скачать руководство пользователя страница 8

8

Bumper Replacement

If the heel bumper needs to be moved or replaced, it can be removed by application
of heat and solvent

being sure not to allow any solvent to contact the Poron® pad

that is between the pylon and foot plate. The pylon should then be lightly sanded
with 120 grit sandpaper to provide a good bonding surface. The bumper is then
adhered to the carbon using cyanoacrylate instant adhesive (commonly referred to as
“super glue”). Contact Fillauer for the proper bumper for the foot size.

Consumable Components:
Foot Shell and Spectra

®

Sock

The AP2 uses a unique cosmetic foot shell that is flexible and durable (sold separately).
Use care in the installation and removal of the foot shell to maintain its appearance
and durability. Always use the shell with an internal Spectra sock (included). Never use
a sharp-edged tool such as a screwdriver to install or remove the foot shell.

Installation

• Slide the provided Spectra sock onto the foot from toe to heel, pulling excess

material to the ankle so that it does not bunch under the heel or toe of the foot.

• Insert the forefoot into the foot shell as far as possible. Set the heel on a supportive

surface with the toe up and push the shell onto the foot until the toe is in position.

• Rotate the foot side to side to allow the foot shell to slide onto the heel.
• Push the foot shell up onto the heel or, if necessary, insert a shoehorn into the foot

shell and allow the heel to slide down a shoehorn into the heel lock. The heel must
lock (Figure 3) in place for proper function and safety.

Figure 4

Heel Lock

«
...
6
7
8
9
10
...
»

Содержание Aeris Performance 2













Отзывы:

Нет отзывов