Fillauer Aeris Performance 2 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 12

Fillauer Aeris
Performance 2 Скачать руководство пользователя страница 4

4

Intended Use

The Aeris Performance 2 (AP2) prosthetic foot is intended for use in lower extremity
prostheses. The foot uses three carbon composite elements (Figure 1) that conform to
terrain while storing and releasing energy during gait. The two upper carbon springs in
the AP2 combine to provide a high rate of energy return while the separation between
those springs reduces stiffness in all three planes. Patients will experience significantly
improved range of motion when walking up and down slopes compared to similar
devices as well as greater compliance on uneven terrain.

Lower Foot

Plate

Split Toe

Design

Pylon Main

Spring

Pylon Top Spring

Figure 1

Indications

• Moderate to active transtibial or transfemoral amputees as defined by functional K3

and K4 levels

•  Unilateral or bilateral patients
•  Patients that would benefit from greater energy return and multi-axial function
•  Patients weighing up to 330 lbs. (150 kg)

Contraindications

• Build height below 6.75 in. (17 cm)
• Patients weighing over 330 lbs. (150 kg)

The device is intended for single patient use only.

Performance Characteristics

•  Patient weight: Up to 330 lbs. (150 kg)
•  Foot weight: 18.35 oz. (520 g)
•  Build height: 6.75 in. (17 cm)
•  Functional level: K3–K4
•  Durability: meets ISO-22675 standard
•  Primary Materials: Carbon composite, stainless steel, titanium, and aluminum
•  Waterproof: The foot unit is waterproof to 1 meter. See additional information

below.

«
...
2
3
4
5
6
...
»

Содержание Aeris Performance 2













Отзывы:

Нет отзывов