3/3
HOUSING INSTALLATION GUIDE
WELDMENT POOL HOUSING
www.filixlighting.com
1
4
3
www.filixlighting.com
CONCRETE POOL HOUSING
1
4
2
1.
CUT STEEL SHEET AT THE INST. POSITION AS PER DIMENSIONS SHOWN BELOW
2.
PLACE THE HOUSING ON TO THE STEEL SHEETING
3.
FIX THE HOUSING TO THE STEEL SHEETING
4.
WELD THE HOUSING TO THE STEEL SHEETING. WELDING PROCESS SHALL BE PERFORMED BY QUALIFIED PROFESSIONAL
5.
ATTACH THE CABLE CONDUIT HOSE TO THE HOUSING GLAND (CONDUIT HOSE NOT SUPPLIED BY MANUFACTURER)
6.
GROUND THE HOUSING (GROUNDING WIRE NOT SUPPLIED BY MANUFACTURER)
3
INSTALLATION
HOUSING (2)
STEEL SHEET
1. ATTACH THE ARPOOL INSTALLATION HOUSING TO THE FORMWORK WITH SCREWS OR NAILS (SCREWS/NAILS NOT
SUPPLIED BY MANUFACTURER;SCREWS/NAILS SHALL BE MADE OUT OF MARINE GRADE STAINLESS STEEL (A4/AISI316L))
2. ROUTE THE CABLE CONDUIT HOSE TO THE DRY AREA WHERE POWER SUPPLY WILL BE LOCATED, AND ATTACH IT TO
HOUSING GLAND (CONDUIT HOSE NOT SUPPLIED BY MANUFACTURER)
3. GROUND THE HOUSING (GROUNDING WIRE NOT SUPPLIED BY MANUFACTURER).
4. AFTER THE CONCRETE POUR AND WHEN THE FORMWORK IS REMOVED CUT THE EXCESS OF NAILS/SCREWS
5. PUT MORTAR AND TILES
IMPORTANT SUGGESTION:
IT IS ADVISED THAT THE THICKNESS OF TILE+MORTAR IS MAXIMUM 25mm/1" THICK.
PAY ATTENTION THAT THREADED HOLES ARE NOT COVERED BY MORTAR OR TILES. THREADED HOLES SHOWN IN
WELDMENT POOL HOUSING INSTALLATION GUIDE
TILES (MAX.
25mm/1")
HOUSING
CONCRETE
GROUNDING
CABLE CONDUIT
HOSE
MORTAR (5)
GROUNDING
(6)
CABLE CONDUIT
HOSE (5)
R67,5mm
+1
-0
(2,7˝+
+0.04˝
-0.00˝
)
325,5mm
+1mm
-0mm
(12,7˝
+0.04˝
-0.04
)
13
5m
m
+1
mm
-0
mm
(5
,3
˝
+0
.0
4˝
-0
,0
0˝
)
CUT OUT DIMENSIONS
6
THREADED HOLES
MUST NOT BE COVERED
5
