Fike 2994502201-C-S, Инструкция по установке и обслуживанию

Страница: 17 / 20

Doc. P/N 8.8517.00.6
Rev. December, 2019 PAGE / 15
7. MISCELLANEOUS
7.1. Certificates and Approvals
Refer to chapters 1.2, 1.3, 1.4.
All explosion protection data are contained in Fike proprietary files, which you can be consulted on request at Fike.
7.2. Ordering Information
You will receive ordering information and Order Code details from Fike on simple request. Contact your nearest Fike
representative in your area.
7.3. Supplementary Documentation
Datasheet ceramic detector Fike ref. X.2.03.01-x
7.4. Applied Norms

EN 60079-0 : 2012 (general requirements for Gases and Dust)

EN 60079-11 : 2012 (Intrinsic safety “i”)

En 60079-26 : 2007 (EPL Ga apparatus)

EN 60079-31 : 2009 (protection by enclosure for Dust “t”)
8. REPAIR AND RETURN AUTHORISATION
Any component that is to be returned to Fike must be approved for return prior to shipment. In order for the
returned component to receive the correct attention (credit, repair, replacement) either under warranty or at the
owner's expense, a Shipping Label for prearranged return authorization must be provided by Fike. A prearranged
return authorization will expedite the business and corrective action measures taken upon receipt of the part(s).
When preparing the component for shipment, please put the Shipping Label that is provided by Fike on the package with
the goods to be returned. Also include a specific statement of the perceived defect or component failure so Fike can
examine the returned part(s). This statement should address symptoms and an operation history of the system in
which the component was installed. If the part(s) have been in contact with any medium, provide a (Material) Safety
Data Sheet – (M)SDS with the shipment.
In the event the suspect part is found within a larger top assembly component, the party providing the Shipping
Label should be able to assist you as to whether the entire assembly must be returned or only the component in
question.
Any part returned without authorization or correct labelling, will not be handled and will be scrapped without any
notification.
To start the repair and return authorization procedure, contact the nearest Fike Sales Outlet. The nearest Fike Sales
Outlet may be found on the Internet at
www.fike.com .