7
Beam Angle
Lens Diameter
Mounting
Tilt Angle
Control
Mini USB Interface
Housing Colors
Protection Class
Estimated LED Lifetime (L70)
Certifications
50,000 Hours
IPX4, Waterproof
Black
For Firmware Upgrades
130mm / 5 inch
32°-59° (With 5” Fresnel Lens)
DMX, 512 Addresses, XLR5, RJ45
+/- 90°
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
CE, UL, FCC
Size (without Barndoor)
Weight (Includes Yoke)
LED
Thermal Design
CCT Range
CRI
Power Consumption
Power Connection
Input Voltage
Operating Temperature
32-104ºF / 0-40º C (Over Temperature Protection)
Dense Matrix LED
Weight (Power Adaptor)
4.8 lbs / 2.2kg
2800-6500K Continuous Tuning
>93 (3000-5600k)
AC Power 340 Max / DC Power 305 Max
Detachable PowerCon Cable
AC Power: 100-240V AC, 50~60Hz, Max 340W / DC Power: 54V DC, Max 305W
Advanced Vapor Cooling
12.8 lbs / 5.8kg
350mm x 325mm x 400mm (With Yoke)
Specifications
For Your Safety
•
CAUTION! High Beam Intensity! - Do NOT look into the Light Source (5) of the fixture.
• Do NOT point the light at combustible or flammable materials.
•
Do NOT attempt to disassemble the body of Q1000. Doing so will void the warranty.
• Do NOT install Q1000 in a damp or wet area.
• Do NOT cover/block the side and back air vents.
•
Use only the included power supply. Failure to do so may cause damage to the light.
• Use only a soft, dry towel to gently clean the exterior of the light.
• Do NOT lift or suspend the light by the power cable.
• Do NOT use the Q1000 or accessories if they display any physical damage.
• Before first use, make sure to remove all protective membranes.
• Do NOT use the gel holder designed for the P series of lights with the Q1000.
• Do NOT mount the Q1000 in a hanging position without a separate safety cable.
A safety cable is NOT included with the Q1000.
