Basic Operation
(refer to Parts Diagram on following page)
• Turning On
The P360 Gen II Series comes with a power adapter. To supply the fixture with power, insert the
connector into the DC Power Input Jack (9), then connect the DC plug into an active wall socket.
For P360 Pro and P360 Pro Plus fixtures, the OLED Display (15) will turn on once it is receiving
power. The On/Off Button (10) toggles the fixture’s output on and off. Settings can still be adjust-
ed while the switch is set to off.
• Positioning
Use the Yoke Knobs (5) to lock the fixture’s tilt position. Tighten the handle to secure.
• Mounting
The Light Stand Adapter (14) on the P360 Gen II Series can be mounted to a Baby or Junior Stand
with combo pin. Secure the fixture to the stand by turning the tightening knob.
• DMX Interface (Pro / Pro Plus only)
Insert the phone jack (TRRS) connector into the Light Control Input Jack (12). Double click the
DMX Address Knob (7) to enter DMX address edit mode. Turn the knob to select desired
address. To return to intensity adjustment mode, click the knob (7) again or wait 3 seconds.
General Notes
•
Please read the following operating instructions very carefully before using this fixture for the
first time. They contain important information on the operation of Fiilex lighting equipment.
•
For your own safety, please follow all safety instructions and warnings.
•
Please also follow the operating instructions of the light and power adapter manufacturers.
•
Keep these operating instructions for you and subsequent users for future reference.
•
For further information, contact Fiilex ([email protected]) or your retailer.
(Magenta/Green)
*
**
* Available in Pro and Pro Plus Models
** Available in the Pro Plus Model
Содержание P360 GEen II Series
Страница 1: ...190102A2...
Страница 5: ......
