background image

 

Dear Customer, 
 
Thank you for purchasing 

Figure’s 1997-2004 Chevrolet C5 

Corvette Custom Grille set.

  These grilles have been 

engineered to enhance the look of your vehicle for the 
duration of its life.  Proper installation is essential to your 
overall satisfaction, so please read these instructions before 
attempting to install the grilles.  Exercise patience; these 
instructions are intended to assist even the most 
mechanically challenged. 
 
Remember, if you are not 100% satisfied with our product, 
simply return the set to us (or to the retailer if you did not 
purchase directly through Figure) within 30 days of purchase 
for a complete refund.   
 
We always love to see pictures of the installed grilles, so we 
encourage you to email us your best!   

(Send to 

[email protected]

 

Package Contents: 

QTY(2) Main Grilles 
*QTY(2) Rear Grilles 
QTY(4) #8 x 

½

” Pan Head Phillips Screws 

QTY(4) #6 Washer 
*QTY(10) Tie Mounts (22 gage galvanized steel wire) 
QTY(1) Instruction Manual 

*Contents vary according to options purchased. 

 

Tools Required for Installation: 

2 Phillips Head Screw Drivers 
Angle cutters (snip pliers) 
*Drill, 1/8” Drill bit  

 
 
 

Содержание GRILLE SET






Отзывы: