background image

Anchor products are of superior design and operate best within the parameters of these instructions.  It is imperative 
that the instructions be carefully read and 

COMPLETELY FOLLOWED

.  Please read installation instructions before the 

installation or removal of this product.  Installation instructions are available online at 

www.anchorinc.com 

or by calling 

1-800-544-4445.

CAUTION: 

1.  For each installation, the installer is solely responsible for evaluating the site and the proper securing method 

determined.  Some soils require different staking or securing than that provided with the tent.  Due to this variety of 
soil conditions, these are the manufacturer’s suggested sequence of installation procedures.  Anchor’s responsibility 
is limited to the manufacture of the tent parts and materials.  We are not responsible for methods that installers may 
choose to erect and secure the tent to the ground.

2.  The number of stakes suggested in the installation instructions do not necessarily meet all or any relevant codes 

on the site of the tent installation.  The number of stakes suggested 

will, in many cases, keep the tent erected,

however, due to various soil conditions; these stakes will be insuf

¿

 cient 

to keep the tent secure in high winds

.

It is the tent installer’s responsibility, not the manufacturer, to determine the appropriate number of stakes to meet 
the necessary wind loads on the site.  Regardless of the number of stakes we suggest, we make no representation 
or warranty as to whether this speci

¿

 c number of stakes will meet the local tent code.  Anchor does not, nor can 

it make any suggestions, representation, or warranties about the adequate staking required at each speci

¿

 c 

installation site.  Staking information provided in the installation instructions 

is not a suggestion about what is 

necessary to meet a site-speci

¿

 c load.

For additional important information, consult:  “The IFAI Procedural Handbook For the Safe Installation and 
Maintenance of Tentage” and the IFAI Pocket Guide “Pullout Capacity of Tent Stakes”, both available from 
the IFAI Tent Rental Division or on our website.

3.  Inasmuch as the weather is unpredictable, good judgment and common sense must be incorporated within 

installation guidelines. It is the responsibility of the tent installer/maintainer to determine the severity of the weather, 
proper time and method of installation and/or erection and disassembly.  

Note:  We recommend that snow and 

ice be removed from the tent surface as soon as possible because accumulation will damage the tent 
or fabric structure.  Please consult with our Engineering Department about the maximum loads for each 
product.

This product has been manufactured for use as a temporary structure.  For the safety of all occupants, evacuation 
is recommended if threatening weather occurs, or if there is any doubt concerning the safe use of this product.

4.  Proper safety equipment should be used at all times to insure a safe installation and take down.  We suggest a 

careful evaluation be made to determine safety equipment needed, such as hard hats, steel-toe shoes, safety 
glasses and other as required.  It is our desire that all installations are safe.  Please be aware of hidden dangers 
both underground, i.e., gas lines, water lines, electrical lines, etc. and above the tent such as power lines and 
telephone lines.

5.  Anchor stands behind its products in accordance with its standard Terms and Conditions of sale.  A copy of our 

Terms and Conditions of Sale can be obtained by contacting Anchor at the telephone number and/or address on 
this document.

EVANSVILLE, INDIANA

PHONE NUMBER

812· 867· 2421

FAX NUMBER

812· 867· 0547

28.2  03-04-09

Содержание Fiesta High Peak

Страница 1: ...ting assembly down into top of PTT Slide bottom plate up to bottom of PTT Align holes in plates and insert the 3 8 x 3 bolts provided Fasten with nuts Step 1 Installing Fiesta High Peak Adapter Assembly Top of peak adapter assembly Bottom Plate PTT High Peak Tube Assembly Hair pin cotter Safety pin lock Figure 2 Step 2 Installing Fiesta High Peak Tube Assembly High Peak Tube Assembly Installed EC ...

Страница 2: ...tube assembly up into position by aligning the holes of the peak weldment with the top hole in the high peak tube other holes are for adjustment as required Push the pin lock through the holes and lock into place Figure 2c Step 2 Installing Fiesta High Peak Tube Assembly cont d Peak adapter assembly on PTT High Peak Tube Assembly Fabric broken away for clarity Figure 2a Figure 2c High Peak Tube As...

Страница 3: ... bottoms of straps Insert the hook of the tension strap into the upright tension connector just above the base plate Starting with the corners tight en the tension strap using the ratchet Do not over tension as this may create unsightly wrinkles or puckering in your tent fabric Watch peak during tensioning to be sure it stays vertical Note When tensioning tents with tension points at valley tensio...

Страница 4: ...mation provided in the installation instructions is not a suggestion about what is necessary to meet a site speci c load For additional important information consult The IFAI Procedural Handbook For the Safe Installation and Maintenance of Tentage and the IFAI Pocket Guide Pullout Capacity of Tent Stakes both available from the IFAI Tent Rental Division or on our website 3 Inasmuch as the weather ...

Отзывы: