Fiessler ESPE Type 4, Руководство по эксплуатации

Страница: 32 / 40

FIESSLER
E L E K T R O N I K
32
9 Specifications
- Transmitter and receiver
ULVTS / ULVTE Characteristic data
Mechanical data
Operating data
Electric data
Safety category 4 pursuant to EN 954-1 and IEC 61496 / EN 61496
Protective field heights 100 mm ... 3000 mm (depending on number of beams)
Protective field width 0,3… 7 m , 0,3...24 m
Construction lengths 196 mm ... 1996 mm (depending on number of beams)
Definition 14 mm
Number of beams 13 ... 247 beams
Operating modes
(selected via DIP switches,
see also Sections 3.5 and 7)
- With / without restart interlock
- With / without contactor check
- equivalent / antivalent outputs
- Muting (only with optional LSUW N1 Muting K switchgear)
- Cycle mode with 1 cycle / 2 cycles (only with optional LSUW NSR3-1 K switchgear)
- Safety mode with restart interlock only during the hazardous movement (only with optional LSUW NSR3-1 K
switchgear)
Housing design
Aluminium profile, plastic-coated RAL 1020, yellow, end pieces made from non-corrosive, spherically reinforced
plastic (polyamide). Plexiglass light outlet and inlet, optional with solvent-resistant silicate glass.
Attachment Shifting fastening brackets on rear side of housing
Weight
Transmitter: 0.45 kg to 4.5 kg depending on construction length
Receiver: 0.5 kg to 5.0 kg depending on construction length
Protection category IP 65
Protection class
III
Operating ambient temperature -10 bis 55
°
C
Storage temperature
-25 bis 70
°
C
ULVTS Transmitter ULVTE Receiver
Power supply 24 V DC, + 20 % - 10 %, SELV 24 V DC,
±
20%, SELV
Current draw max. 250 mA max. 250 mA (no load)
Outputs -
OSSD 1 and 2:
Failsafe PNP outputs, max. 0.5 A,
short-circuit and cross-circuit monitoring
(in operating mode with antivalent outputs, output 2 is
not failsafe, max. 20 mA)
Inputs - Contactor check and start button inputs: 0 V to 24 VDC _
Electric connection
Integrated connector plug with PG9 as strain relief,
alternatively conventional connector plug Integrated connector plug with PG9 as strain relief,
alternatively conventional connector plug
Connecting cable 3-pol. max. 1,5 mm2 5 to 7-pin (depending on operating mode), max. 1.5 mm2
BA - ULVT