BACnet
®
Protocol Converter Kit
3015-5609 Rev 1
7
6. Network Configuration
The ProtoNode is factory-configured with the following defaults.
•
Default IP Address
192.168.1.24
•
Default Subnet Mask
255.255.255.0
If a different IP address or subnet mask is desired, or for other
configuration settings, please refer to the appropriate FieldServer™
documentation.
7. Supported MODBUS Registers
The following is a list of the MZ’s MODBUS registers that are supported
by the current revision of our ProtoNode configuration files.
WARNING:
Writing to the refrigerant type setting should
only occur when the MZ is being configured. Frequent writes
should be avoided.
BACnet
Object
ID
BACnet Object
Description
([#]=Zone #)
BACnet
Object Type
Access
(R=Read,
W=Write)
Source
MODBUS
Register
Number
MODBUS
Register
Description
1
Active Zone
Analog Input
R
0x0011
Status
2
Fault
Analog Input
R
3
PPM [1]
Analog Input
R
0x1201
Zone 1 Data
4
Refrig Type [1]
Analog Input
R
5
Refrig Type [1]
Analog Value
W
6
Alarm [1]
Analog Input
R
7
PPM [2]
Analog Input
R
0x1202
Zone 2 Data
8
Refrig Type [2]
Analog Input
R
9
Refrig Type [2]
Analog Value
W
10
Alarm [2]
Analog Input
R
11
PPM [3]
Analog Input
R
0x1203
Zone 3 Data
12
Refrig Type [3]
Analog Input
R
13
Refrig Type [3]
Analog Value
W
14
Alarm [3]
Analog Input
R
