manualshive.com logo in svg

Fields Edge M220, Руководство оператора

Поделиться
Скачать
Fields Edge M220 Скачать руководство пользователя страница 13

13

Check for parts online at 

www.getfieldsedge.com

 or call 800-345-6007 M-F 8-5

Operator's Manual

String Mower M220

How to Adjust the Height/Angle of the Handle

Use the cam levers on each side of the handle to adjust the 

height of the handle.  

SEE FIGURE 12

1.   Hold the handle with one hand and open both cam levers 

until the ratchet teeth are disengaged. Do not remove the 

nuts. 

2.  Move the handle up or down to the desired position, then 

align the ratchet teeth. Make sure both sides of the handle 

are level.

3.   Tighten (lock) the lever.

How to Set the Height of the Cut

The height of the cut can be set using three different height 

bump heads.  The recommended cutting height for the 

average yard is two (2) inches.  

SEE FIGURE 13

1.  Stop the engine.  Wait for all moving parts to stop.
2.  Grasp the bump head with your hand and rotate in the 

direction of the arrows to the unlock position. Lift off 

head.

NOTE:  If the bump head is tight, a screw drive or similar 

sized metal rod can be inserted in the bump head 

holes to assist in removal.

3.  Install alternate bump head and tighten in direction of 

arrows to the lock position.

 

WARNING

BEFORE YOU SET THE HEIGHT OF THE CUT, STOP 

THE ENGINE.  WAIT FOR ALL MOVING PARTS 

TO STOP.  ALLOW THE ENGINE TO COOL AND 

DISCONNECT THE SPARK PLUG WIRE.

To Remove the Wheels

To detach the wheels, loosen the axle bolts and remove the 

wheel.  Reverse instructions to reattach tire.  

 

SEE FIGURE 11

FIGURE 11: 

Removing the Wheels.

AXLE BOLT

FIGURE 12:

 Adjusting The Height Of The Handle. (Lever shown in 

OPEN position)

LOCKED

OPEN

HANDLE

CAM LEVER

RATCHET 

TEETH

FIGURE 13: 

Setting The Height Of Your Cut With Bump Heads.

1 INCH

2 INCH

3 INCH

BUMP

HEAD 1

BUMP

HEAD 2

BUMP

HEAD 3

Содержание M220

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды