Fields at Work ExpoM - RF, Руководство пользователя

Страница: 14 / 16

Fields at Work GmbH, Hegibachstrasse 41, 8032 Zürich, Schweiz
2019 Fields at Work GmbH, Zurich
Page 14/16
ExpoM - RF manual rev. 2.3
7.5. Battery Management
Battery Built-in rechargeable Li-ion battery
Typical operating time with
3 sec sample interval
>12h (GPS and Bluetooth ON)
Typical operating time
3 sec sample interval
>16h (GPS and Bluetooth OFF)
Typical Operating time
10 sec sample interval
>55h (GPS and Bluetooth OFF)
Typical Operating time
1 minute sample interval
>7 days (GPS and Bluetooth OFF)
Charging USB compliant charger ports are supported (min. current rating 1000 mA)
7.6. ExpoM RF Utility Software
Hardware requirements Dual core processor recommended
Operating System Windows (XP, 7, 8) with installed .NET environment (Version 4 or newer)
Storage usage 5 MB
Installation
No installation required – ExpoM RF Utility can be started from the downloaded
folder
Download www.fieldsatwork.ch
7.7. ExpoM RF Android Software
Processor No limitations
Operating System Android 4.0 or newer
Storage usage Less than 5 MB
Download www.fieldsatwork.ch
Size and weight 16 cm x 8 cm x 3-5 cm (L x W x H) weight: approx. 320g
Time Integrated precision (± 2 ppm) real time clock
Connectivity USB, Bluetooth, GPS
Battery Integrated rechargeable Li-ion battery
Operation time
>10h operation using a sample interval of 3 seconds, GPS and Bluetooth on.
Lifetime is extended by longer sample intervals and disabled GPS/Bluetooth
Charging USB interface; Generic USB chargers are supported (1A minimum current rating)
Marker Built-in marker button to highlight specific events
Storage Non-volatile internal memory; Capacity: 50 million measurement samples
Device Calibration 15 field levels, three axes (for each frequency band)
Case IP64 protected; Material: ABS