Limited Warranty
This meter is warranted against defects in material or workmanship for one year from
date of purchase from an authorized Fieldpiece dealer. Fieldpiece will replace or repair the
defective unit, at its option, subject to verification of the defect.
This warranty does not apply to defects resulting from abuse, neglect, accident,
unauthorized repair, alteration, or unreasonable use of the instrument.
Any implied warranties arising from the sale of a Fieldpiece product, including but not
limited to implied warranties of merchantability and fitness for a particular purpose, are
limited to the above. Fieldpiece shall not be liable for loss of use of the instrument or other
incidental or consequential damages, expenses, or economic loss, or for any claim of such
damage, expenses, or economic loss.
State laws vary. The above limitations or exclusions may not apply to you.
Obtaining Service
Email Fieldpiece warranty department at [email protected] to get an RMA
and for current fixed price repair service. Send check or money order made out to Fieldpiece
Instruments for the amount quoted. If your meter is under warranty there will be no cost for
the repair/replacement. Send your meter, freight prepaid, to Fieldpiece Instruments. Send
proof of date and location of purchase for in-warranty service. The meter will be repaired or
replaced, at the option of Fieldpiece, and returned via least cost transportation.
For international customers, warranty for products purchased outside of the U.S. should
be handled through local distributors. Visit our website www.fieldpiece.com to find your
local distributor.
© Fieldpiece Instruments, Inc 2015; v19
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1 Reorient the receiving antenna.
2 Increase the separation between the equipment and receiver.
3 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4 Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
FCC Caution:
To ensure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
Specifications
Wireless range:
1 to 100 feet (Fieldpiece tools to JL2); 1 to 30 feet (JL2 to mobile device).
Building materials may adversely affect wireless distance.
Initial sync setup range:
1 to 10 feet (Fieldpiece tools to JL2)
Mini-USB port:
For charging and updating device firmware.
Operating (discharge) environment:
32°F to 122°F (0°C to 50°C) at <85% RH
Storage temperature:
-4°F to 140°F (-20°C to 60°C), at <85% RH
Battery charging environment:
32°F to 113°F (0°C to 45°C), at <85% RH
Battery type:
3.7V rechargeable lithium-ion polymer battery
Battery life:
48 hours approx.
Auto power off:
30 minutes when not wirelessly connected.
Low Battery indication:
Blinking red LED indicates
approximately 1 hour of battery life remaining.
Weight:
2.9 ounces (82 g)
Wireless Tips
1 You can connect your wireless tools to JL2 in any order, just not at the same time.
2 Once your wireless SMAN and SDP2 have been synced to the JL2, they will automatically
re-sync to JL2 when turned back on. Turn on JL2 first, then your Fieldpiece wireless tools
to avoid any unnecessary searching by the tools.
3 You can use a new SMAN or SDP2 with Job Link by syncing the new tool. Job Link
automatically de-syncs the previous tool.
4 In European wireless mode, the green and blue LEDs are swapped.
5 To de-sync all tools from your JL2, press SYNC for 5 seconds (LED blinks blue once).
6 Only one SMAN and/or one SDP2 can be synced to a JL2 at a time.
7 Building materials may degrade any RF signal and adversely affect the wireless range of
Fieldpiece tools to JL2.
99 Washington Street
Melrose, MA 02176
Phone
781-665-
1400
Toll Free 1-800-517-8431
