
EN
16
FZR 5167-B
Maintenance
REPLACING THE MOWING BLADES
Caution!
Contact an authorised service centre
If you wish to replace the mowing blade, remove the bolt (Fig. 10). Perform the installation according to the provided
picture. Tighten the screw. The tightening torque is 40 Nm. When replacing the blade, replace the fastening bolt as well.
Fig. 10
CHANGING THE MOTOR OIL
Caution!
For this task, we recommend that you contact an authorised service centre.
Start up the lawnmower engine for a short while to warm up
the oil. Then extract the oil with the FZR 9050 oil extractor.
Add type SAE30 or 15W-40 oil into the oil tank.
When the oil dipstick is inserted into the hole and screwed in,
the oil level should be between the Min and Max marks (Fig.
11). Do not overfill the oil tank.
Start the engine and allow it to run for a short time. Stop the
engine, wait 1 minute and remeasure the oil level in the oil tank.
If necessary, top up the oil to the required level.
CLEANING THE AIR FILTER
Caution!
Clean the air filter after every 5 engine hours. When working in dusty environments (e.g.
molehills in the lawn), clean the filter after each mowing.
-
remove the air filter cover (Fig. 12)
-
remove the air filter (Fig. 13) and clean it, e.g. with a vacuum cleaner. If the filter is damaged, replace it.
Fig. 12
Fig. 13
Fig. 11
Содержание FZR 5167-B
