Fieldmann FZO 8060, Руководство пользователя, Страница: 15 / 80

EN
HAND PRESSURE SPRAYER USER’S MANUAL
15
Cleaning and care
7. CLEANING AND CARE
WARNING!
Always release residual pressure before cleaning (See Fig. 3). Protect yourself with
suitable personal protective equipment (PPE) from hazardous substances, as you wold
while spraying. Take precautions to avoid environmental contamination from hazardous
substances.
WARNING!
If the nozzle (7) seems to be blocked, do not try to blow it free with your mouth.
Clean the pressure sprayer after each use!
1. Cleaning of the pressure sprayer
Unscrew the spray nozzle (7).
Clean the spray nozzle (7) under running water.
If the spray nozzle (7) is clogged, clean it by pushing a needle through it.
Flush through the pressure sprayer, pipes and tubes with water.
Clean the surfaces of the product with a moist cloth.
2. Cleaning of the suction hose (12)
Loosen the union nut of the suction hose (9) on the container (5).
Pull the suction hose (12) out of the container (5).
Clean the suction hose (12) under running water.
After cleaning, insert the suction hose (12) back in its opening on the container (5).
Tighten the union nut (9) hand-tight.
3. Clean the pump (2) and container (5)
Remove the pump unit (2) and fl ush it under running water.
Rinse the spray container (5) with water. Turn it upside down to empty it completely.
STORAGE
Release any residual pressure still present in the container (5) after use. To do this, pull the safety valve
button (3) upwards until you can no longer hear the hiss of escaping air.
Thoroughly clean the device and allow it to dry before you put it away for the winter. This will avoid frost
damage.
Clean the pressure sprayer before storing it away.
Remove any leftover spray product from the container (5) and the pipes.
Store the pressure sprayer in a dry, dust-free place.