Fieldmann FZF 1001-A, Руководство пользователя, Страница: 16 / 19

FZF 1001-A
16
EN
Instructions for correct use | Putting into operation
Only charge the battery using the original charger supplied with this product.
Before charging check that the battery is dry and clean.
Only use the correct battery type.
When handling and storing the battery, ensure that it is not short circuited by conductive
materials such as rings, keys, coins. This creates the risk of the battery overheating, which
could lead to a fire.
Do not throw the battery into a fire. Do not throw the battery into ordinary municipal waste. For
proper disposal and recycling, take these products to designated collection points. Ask your
local authorities or collection facility for more details.
Charger
Only use the charger for charging the original batteries supplied with the product. When
charging a different battery type there is danger of sudden combustion, serious injury to
persons, damage to property.
Never charge non-rechargeable batteries.
Do not expose the charger to the effects of water or rain.
Do not open the charger.
Do not disassemble the charger.
7. PUTTING INTO OPERATION
Charging the battery (Pic. 2)
Before first charging the battery, please carefully read all safety instructions and warnings.
Before first use or when you have not used the garden blower for a long time, it is necessary to
fully charge the battery, otherwise its lifespan will be reduced. The battery heats up slightly when
charging, this is a normal event and does not indicate a problem.
Note:
DO NOT CHARGE THE BATTERY IF AMBIENT TEMPERATURE IS BELOW 4°C OR ABOVE
40°C. RECOMMENDED TEMPERATURE FOR CHARGING: APPROXIMATELY 24ºC.
Note:
The battery will achieve full capacity after several charge/discharge cycles.
Insert the cable into the charger.
Note: Important: Do not use any other chargers, use only the charger that came with the
product.
Connect the charger to a power socket. The LED indicator light will be green.
Note: Do not use motor-powered electricity generators or other DC sources for charging.
Place the battery into the charger. The LED indicator light is red, indicating that the battery is
charging.