Fieldmann FZD 4020-E, Руководство по эксплуатации

Страница: 13 / 82

13
OPERATING INSTRUCTIONS ELECTRICAL SHREDDER
EN Safety instructions
Ensure that the loading funnel inlet is empty before you start the machine.
Keep your head and body away from the infeed opening.
Do not move your hands, other body parts or clothing into the infeed chamber, ejector chute
or near other moving parts.
Make sure that you are balanced and standing on a firm surface at all times. Do not stretch
forwards. Never stand higher than the machine when feeding material into it.
Keep away from the discharge zone when you start the machine.
If foreign bodies get into the cutting tool or the machine generates unusual noises or vibrates
in a strange way, switch off the motor immediately and allow the machine to come to a
standstill.
Pull the plug and carry out the following work:
Check the machine for signs of damage •
Check that all the parts are secure and tighten them if necessary. •
Have any damaged parts replaced or repaired, but use only spare parts of the same •
type and equivalent quality
If the machine is blocked switch off the motor and pull the plug before you start the cleaning
procedure. Ensure that the motor is clear of waste and other accumulations to protect the
motor from suffering damage or possibly catching fire.
Ensure that all the covers and guards are in position and in good working order.
Do not tip the machine whilst the motor is running.
Switch off the machine before you fit or remove the collection container.
The tool may only be used outdoors (i.e. not in the vicinity of a wall or any other ridged object)
Damaged or illegible labels must be replaced
Allow the tool to cool before carrying out any maintenance work, adjustments, etc.
Never use the machine while other people are nearby.
When inserting material take special care to ensure that it does not contain any metal, stones,
bottles, cans or other foreign bodies.
Do not allow processed material to accumulate within the discharge area; this could prevent
the machine being able to discharge correctly and result in material recoiling through the
infeed opening.
When servicing the cutting tool, remember that it may still be moving due to the starting
mechanism, even if the motor is not running because of the cover interlock.
Children must not be permitted to use the machine.
Wear ear protectors and safety goggles. Wear these throughout the time the machine is in
operation.
Before starting the machine, check all screws, nuts, bolts and other fastening materials to
ensure that they are secure and that all covers and guards are in position. Damaged or
illegible labels must be replaced.
Connect the equipment to the power supply only via an earth-leakage circuit breaker with
max. 30mA tripping current.