Fieldmann FZD 4010-E, Руководство по эксплуатации

Страница: 12 / 20

FZD 4010-E
12
EN
Safety measures and instructions
Use the proper tools!
Do not use this electrical equipment for operations which it is not intended or designed for.
Wear suitable clothes!
Avoid wearing loose clothes and jewellery while working with the shredder. The machine
might catch them! While working with the equipment outdoors, wear gloves and non-slip sole
shoes. Have long hair arranged and covered so that the machine cannot catch it.
Use protective equipment while working!
Wear eye protection, a face-guard or a special dust mask if needed when doing the planned
activity. Wear hearing protection if working for a longer time or if carrying out a particularly
noisy activity.
Additional hints…
For optimal fulfillment of the task, you need to choose an appropriate tool. Do not use an
unsuitable tool for the demanded activity. Think better of what tool to use for what activity.
Hold tight!
Use clamps or a vice for fixation of the tool.
Be careful of the power line!
Make sure that the cable is attached properly and securely so as not to get disconnected,
broken or damaged in any other way, for instance as a result of inadequate loading.
Do not pull the power supply cable!
Never handle the equipment by pulling the cable. Do not even try to disconnect it from the
mains this way. Protect the cable against fire, oil and sharp edges.
Keep proper balance!
Keep proper balance and footing at all times.
Maintain your tools!
Maintain the shredding mechanism blade sharp and clean, thus you can enhance its
performance. Be particular about lubrication and replacement of worn-out parts. Check the
power supply cable regularly and in the case of need have it repaired in an authorized service
station. Pay close attention also to the extension cable condition. Maintain the equipment
handles dry, clean and without rests of oils and greases.