Fieldmann FZD 4007-E, Руководство пользователя

Страница: 12 / 27

EN 12
FZD 4007-E
SAFETY PRECAUTIONS AND INSTRUCTIONS
Maintain your tools!
Keep the shredding mechanism’s edge sharp and clean to increase its performance. Also, be sure to
perform lubrication and replacement of worn parts. Check the power cord on regular basis and return it
to an authorized service centre for repair if needed. Also, pay attention to the extension cord’s condition.
Keep the equipment handled dry, clean and free of oil and lubricant residues.
Be always ready!
Before further use, it’s necessary that a damaged stop or other component should be checked and
repaired to ensure proper functioning. Inspect the function and adjustment of all the machine’s movable
parts and their components. If protective covers and other similar devices get damaged, have them
replaced in an authorized service centre unless otherwise specifi ed in this user’s manual. Similarly, have
defective controls (switches/buttons) replaced in an authorized service centre. Don’t use the equipment if
these controls don’t work correctly.
Danger of electrical shock!
If you don’t use the equipment or you are about to perform a repair or the replacement of a faulty
component (such as a blade), always turn off and unplug the equipment fi rst.
Habit is second nature!
Before turning the machine back on after a service repair, make sure you have removed the just applied
tools (such as spanners, pipe wrenches etc.) from the equipment.
Be always alert!
Do not move the powered equipment with your fi nger on the switch. Before plugging the equipment in the
mains, make sure that the switch is in the off position.
Use your judgement!
Think logically and don’t use the equipment if you are tired, for example!
ATTENTION! Using parts or components that are not stated / recommended in the user’s manual
increases the risk of injury.
Seek a professional!
This electric equipment complies with the relevant safety requirements. Please entrust all repairs to
a qualifi ed professional who uses only original spare parts. Otherwise you as the users put your health
at risk. Do not attempt to open the tool cover. A qualifi ed professional is authorized to replace the power
cords.
Additional safety instructions
The power source voltage must match the voltage stated on the relevant equipment name plate.
It’s useful if the shredded is used with a residual current device with sensitivity up to 30 mA.