Fieldmann FZD 4001-E, Инструкция по эксплуатации

Страница: 17 / 108

17
OPERATING INSTRUCTIONS ELECTRICAL SHREDDER
EN Operation
WARNING! Product damage
Before starting the product, make sure that there is no material in the hopper. Before feeding
material in, wait until the chipper has reached its working speed.
Fold down the cable protector and connect the product to the mains.
Press button [1].
The product starts up.
Press button [0].
The product switches off.
Overload protection
Note:
If a blocked blade causes an overload, the circuit is automatically interrupted to protect the
motor.
De-energise the product.
Remove blocked chippings.
Note:
Allow the motor to cool down for at least five minutes!
Press reset button (3).
Re-connect the power supply.
Start the product.
Empty the collection container
P. 8, item 8
WARNING! Risk of injury!
Press the Off button[0] and separate the device from the main power supply before remo-ving
or inserting the collection container.
Note:
The locking lever(11) has the function of a safety switch and must be in PositionA while
operating the product.
If the locking lever(11) should not be correctly snapped in, this and the switch must be
cleaned in the product, if required..
The collection container must be emptied when you have finished working with the machine or
when it is full.
Bring the locking mechanism (11) to position B.
Pull the collection container (4) completely out of the frame.
Empty the container (4).
Slide the collection container (4) onto the frame as far as it will go.