Fieldmann FDUB 70605-0, Руководство пользователя

Страница: 11 / 80

EN
ANGLE GRINDER USER’S MANUAL
11
Specific safety instructions
Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large
workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line
of cut and near the edge of the workpiece on both sides of the wheel.
Use extra caution when making a “pocket cut” into existing walls or other blind areas. The protruding wheel
may cut gas or water pipes, electrical wiring or objects that can cause kickback.
Safety warnings specifi c for sanding operations
Do not use excessively oversized sanding disc paper. Follow manufacturers recomme ndations, when
selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration
hazard and may cause snagging, tearing of the disc, or kickback.
Safety warnings specifi c for wire brushing operations
Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the
wires by applying excessive load to the brush.T he wire bristles can easily penetrate light clothing and/or
skin.
If the use of a guard is recommended for wire brushing, do not allow any interference of the wire wheel or
brush with the guard. Wire wheel or brush may expand in diameter due to work load and centrifugal forces.