Fieldmann FDPO 200711-E, Руководство пользователя, Страница: 13 / 15

EN 14
FDPO 200711-E
Technical data | Cleaning and maintenance
7. TECHNICAL DATA
Mains voltage "$7)[
Power input 710 W
Stroke speed 0–2800 min -1
Cutting depth, wood 115 mm
Cutting depth, iron 5 mm
Cutting depth, metal pipe 60 mm
Sound pressure level L
pA
= 82.1 dB (A), K
pA
= 5 dB (A)
Sound power level L
wA
= 93.1 dB (A), K
wA
= 5 dB (A)
Vibration level ah, B = 22.5 m/s 2 , K =1.5 m/s 2
8. CLEANING AND MAINTENANCE
Always pull out the mains power plug before starting any cleaning work.
Cleaning
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
We recommend that you clean the device immediately each time you have fi nished using it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualifi ed electrician.
IMPORTANT
The carbon brushes should not be rep laced by anyone but a qualifi ed electrician.
Maintenance
There are no parts inside the equipment which require additional maintenance.