Fieldmann FDPO 200711-E, Руководство пользователя, Страница: 11 / 15

EN 12
FDPO 200711-E
5. BEFORE STARTING THE EQUIPMENT
Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to
the mains data.
Always pull the power plug before making adjustments to the equipment.
Changing the saw blade (B2)
Always switch off and unplug the reciprocating saw before working on the machine or changing the saw
blade.
Turn the ring on the blade holder (6) as shown in Fig. 2 until the blade lets itself be slipped into the slot of the
blade holder (6).
When you now let go of the ring again, the ring should return to its starting position.
If this fails to happen, try turning the ring by hand into its starting position.
Pull on the blade to check whether it sits tightly in the holder.
Adjusting the soleplate (B2)
Loosen the lever(8), pull or push the soleplate to a desired position.
Push the lever(8) back.
Check that the soleplate is secure.
Electronic speed control (B3)
By increasing pressing the on / off switch (1), the speed increases.
With the speed selection (3) in the ON / OFF switch (1), the desired speed can be selected.
Turn : higher speed
Turn towards -: lower speed
Before starting the equipment