3.7 Attaching plough to the tractor.
3.6 Required hydraulics equipment
4.3 Levelling the plough
2.5 Safety on highway transport
3.
Preparation of Tractor
3.4 Chain and sway blocks of the three point linkage
3.3 Top link
3.5 Hydraulics
3.1 Tyres
3.2 Lift Rods
4.
Uses
4.6 Draft of the plough
4.1 Instruction of tractor preparation
4.2 Adjustments
4.4 Warning for driver
4.5 Danger
6.
Troubleshooting
5.
Maintenance
1.
Introduction
2.
Safety Instructions
2.2 Safety while connecting hydraulic lines.
2.1 Safety while attaching & detaching
2.3 Safety while operating the machine.
2.4 Safety for maintenance
INDEX
5. All costs incurred by the dealer for traveling to or transporting the equipment for
warranty inspection and claims will be borne by the customer.
1. Read and understand the information contained in this manual.
2. Operate, lubricate, assemble and maintain the equipment in accordance with all
instructions and safety procedures in this manual.
3. Inspect the equipment and replace or repair any parts that are damaged or worn
out which under continued operation would cause damage, wear to other parts,
or cause a safety hazard.
4. Return the equipment or parts to the authorized “FIELDKING” dealer, from where
it was purchased, for service or replacement of defective parts that are covered
by warranty. (The “FIELDKING” Factory may inspect equipment or parts before
warranty claims are honored.)
PURCHASER / OPERATOR’S RESPONSIBILITY