1
The purchaser may only make the claims under warranty when he has
complied with the warranty conditions in the supply contract.
1.3 WHEN THE WARRANTY BECOMES VOID
1.2 WARRANTY
Besides the cases specified in the supply agreement, the warranty shall in any
case become void. When the implement has been used beyond the specified
power limit like (Tractor Horse Power) When repairs made by the customer
without authorization from the manufacturer or owing to installation of spurious
spare parts, the machine is subjected to variations and the damage can be
ascribed to these variations. When the user has failed to comply with the
instructions in this handbook.If the implement is used in very hard/stony soil no
warranty of discs will be given. No warranty will be given if the service and
greasing is not done on time.
Compliance with the instructions in this handbook is also important since
manufacturer declines all and every responsibility for damage to persons or
property caused by negligence and failure to comply with these instructions.
Any claims following the receipt of damaged goods shall be presented in writing
within 8 days from the receipt of the goods.
When the machine is delivered, check that it has not been subjected to damage
during transport and that the accessories are in a perfect condition and
complete.
This handbook contains the use and maintenance instructions with a list of the
spare parts of the Disc Harrow.
1. TECHNICAL DATA
1.1 INTRODUCTION
Regular and satisfactory operation together with economic and long lasting use
of the implement depends on the compliance with instructions given in this
handbook.
This Disc harrow is equipped with heavy-duty square pipe box frame specially
designed for harrowing / land preparation of rough soil (Secondary finer
operation).
2
2. USAGE INSTRUCTIONS
Maintain the harrow as per the instructions of this handbook to be entitled for
warranty.
1.4 WARNING
Thoroughly read the instruction manual before proceeding with the various
operations.
2. Also determine soil and trash conditions of the field and make the
preliminary adjustments. e.g.
a) Disc gang angle & width of cut adjustment
1. Before mounting of disc harrow make sure that all nuts & bolts are properly
secured.
2.1 ADJUSTMENTS BEFORE USE
Disc gang angle adjustment 0° to 50°
Cutting width 0 to A increasing
Cutting width 0 to B decreasing
Fig. 2.1 (a)
B
A
0
0° to 50°