FIELD OF VIEW GEOSNAP EXPRESS, Руководство пользователя

Страница: 35 / 35

© Field of View 2016 GeoSnap Express User Manual
Specifications & Settings
32 32
GeoSnap Express and DSLR Checklist
GeoSnap Express file setup
□ IR LED code (or wired trigger)
□ File name type (Sony, Canon, etc)
□ Trigger mode (distance, time, etc)
□ Trigger mode parameter (# meters or # seconds)
□ Resend trigger time (typically around 750ms)
□ Control mode (none, button toggle, etc)
□ Camera orientation (top forward, bottom forward, etc)
□ Delete IMAGENUM.txt file off of the card if you want the IMG file to start at 1
DSLR setup
□ Insert fully charged battery into camera
□ Insert empty SD card into camera
□ Make sure all of the settings are correct
o
Shutter priority, 1/1000s (shutter speed)
o
ISO Auto
o
White Balance Sunny/Cloudy
o
MF (Manual Focus) – lens taped down and focused at infinity
o
Single capture – remote shooting
o
Large image quality
Pre-flight system checks
□ Lens cap is off of camera and lens is clean
□ Hotshoe module is on the camera and tightened down
□ GeoSnap/camera trigger cable is in place and secure
□ GeoSnap microSD card is in the GeoSnap control module
□ GeoSnap GPS antenna is screwed on and antenna is mounted securely
□ Camera/GeoSnap are securely mounted on aircraft
Powering the system
□ Power on DSLR
□ Plug in the GeoSnap Express
□ Watch for GPS lock on GeoSnap Express (green LED will start flashing quicker)
□ If in distance trigger mode, watch for first trigger (10sec after GPS lock is obtained)
□ Take-off
Post-flight
□ Press and hold GeoSnap onboard button to stop logging
□ Power down GeoSnap and DSLR
□ Remove GeoSnap microSD card and DSLR SD card