Field Controls UV-16/24 Скачать руководство пользователя страница 1

www.fieldcontrols.com

Please retain these instructions after installation.

This device 

MUST

 be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of 

a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged 

in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 

precautions required, and has complied with all the requirements of the authority having jurisdiction.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for 

use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By:

Phone:

UV-AIRE AIR PURIFYING SYSTEM

Model: UV-16/24

The UV-Aire unit is designed to emit powerful UVC Band light rays, which sterilize and reduce airborne 

microorganisms as they pass through a heating or air conditioning system.  It is installed in the main supply 

or return duct and operates continuously to automatically purify the air in the home 24 hours a day.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or 

condition, nor for use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY 

BEFORE PROCEEDING WITH THE INSTALLATION.

WARNING:

 For use with 24V ONLY! Do not exceed voltage rating. Severe damage to device and/or 

fire could result.  Verify proper voltage. 

NOTE:

 This unit may require a supplemental 24V/40VA Transformer.

ITEMS INCLUDED IN KIT:

1-24Volt UV-Aire Ballast Assembly

1-Mounting Base

1-Ultraviolet Lamp

6-Sheet Metal Mounting Screws

1-Instruction Sheet

1-Fiberglass Duct Board 

   Mounting Bracket

1-UVC Light Shield

1-24V Transformer 

2-Fork Terminals

2-Wire Nuts

Содержание UV-16/24









Отзывы: