Field Controls Trio Pro, Руководство пользователя, Страница: 14 / 40

Step 3 Gently place the PRO- Cell
Catalyst (metal honeycomb) in the
innermost position closest to the
UVC lamp as shown in the figure
with the tag pointing outwards.
PRO-Cell
Catalyst
MAINTENANCE INSTRUCTIONS
Step 4 Next, place the unpackaged
HEPA with carbon filter back into the
appliance with the tag pointing outwards.
HEPA with
carbon filter
Please ensure the appliance is unplugged from the wall before performing any
maintenance.
Cleaning of the Appliance
When cleaning the air purifier, please turn off the power first and clean it with a soft,
dry cloth.
Do not use alcohol, gasoline, benzene or other chemical solvents for cleaning.
Suggestions: Clean the air purifier once a month. If the operating environment is poor,
increase the cleaning frequency.
The Pre-filter screen may be dusty. Remove the dust with a dust collector or a vacuum
to extend the usage period of the filter. (It is advised to clean the filter once per month).
Pre-filter
Step 5 Place the Pre-filter frame
into the slots on the bottom of the
appliance and press the top towards
the appliance until the clasps click.
Step 6 Place the filter cover on the unit
once all the filters have been installed.
Repeat steps 1 - 6 on opposite side.
To increase the life of the air purifier, perform regular maintenance and care.
Before performing maintenance, be sure to shut down the air purifier and unplug
the power cord from the power source. After using the air purifier, if the filter needs
fto be replaced, the Filter Replacement icon on the control panel will flash, indicating
the filter should be replaced. During the use of the air
During the use of the air purifier, it is recommended that the pre-filter be cleaned
every three months toextend the filter service life and dust removal effect. The filter
set needs to be replaced after 6 months of use.
All maintenance parts can only be inspected and provided
by our authorized service agency.