Fidelity Electronics FM180, Руководство по эксплуатации

Страница: 22 / 37

22
6.5 Memory Accumulation Function
6.5.1 To Accumulate a Transaction to Memory
10 11 12
a.
Press [M+]
13
to save and accumulate data of current transaction to
memory,
b.
This instrument displays “ ≡ n ”. M+ Indicator appears to indicate that
memory contains stored data. “ ≡ n ”” means the total number of
transactions accumulated to memory,
c.
This instrument returns to normal display status after 2 seconds,
d.
Repeat a to c for subsequent transactions
14
,
Note: -
1.
Unstable weight will not be accumulated. If M+ is pressed when
weight reading is not unstable, this instrument will reject this
command and response with 3 beeps.
6.5.2 Memory Recall and Clearance
a.
Press [MR] to recall total accumulated weight from memory,
After [MR] is pressed, Mr Indicator appears to indicate the total
accumulated weight value is displayed. At the same time, instrument
displays “
≡ n” ( n means the number of transactions accumulated) follow
by the total accumulated weight stored in memory,
b.
At this point: -
 Press [Zero] to quit, or
 Press [MR] again to clear memory then press [Zero] to quit to
operation mode. After that, both MR and M+ Indicator disappear to
indicate no data is stored in memory.
10
Memory Accumulation Function support weighing function only.
11
Weight less than 20d (or 20d
1
for dual range) will not be accumulated to memory.
12
All data stored will be erased when this instrument is powered off.
13
or press [PRINT] if F17 is = ON
14
Weight must return to or below zero to enable another weight accumulation.