Fidelity Electronics FM180, Руководство по эксплуатации

Страница: 11 / 37

11
4. Getting Started
In order to obtain an accurate weighing result, the weighing platform,
(
hereinafter referred as platform ) must be placed on a strong and level
surface. Avoid using the platform and this instrument ( hereinafter
collectively referred as scale ) in environment where excessive wind flow,
vibration and extreme temperature change exist
General Warning: -
 The instrument is not an explosion proof device.
 The instrument is not a water proof device.
 Do not open the instrument, no user serviceable parts inside.
Always contact your dealer for service.
 Do not place this instrument in where shock, excessive vibration
or extremes of temperature (before or after installation) exist.
4.1 Built-In Rechargeable Battery
The instrument is equipped with a built-in rechargeable battery. Before first
time use, recharge it for at least 8 hours to ensure the best battery
performance.
4.2 Power Adaptor
One universal voltage power adaptor with 4 power plugs are supplied with
this instrument. Select the suitable power plug and slide it into the power
adaptor very carefully until a "click" sound comes out.
4.3 Connection
5
with Weighing Platform or Load Cell Junction Box
Connect this instrument with a weighing platform (load cell) through load cell
connector located at the back according to the below pin assignment table.
Note: - If a 4-wire load cell or junction box is used, short-circuit pin 1&2
and pin 3&4. Otherwise, this instrument will not work.
5
Turn this instrument off and cut off power before making any connections or disconnections.