Fidelis Network Collector SA Rev-1 Series, Быстрый старт

Страница: 7 / 9

QUICK START GUIDE
Fidelis Network® Collector SA
www.fidelissecurity.com
©Fidelis Cybersecurity
7
8. Fidelis Network Integration
Register Collector SA with CommandPost/K2
1. Log into the CommandPost/K2 user interface from a web browser.
2. Navigate to
System > Components .
3. Click Add Component .
4. Fill in the Add New Component form:
Component Type Specify Collector .
Component Name Specify a “friendly” name for the Collector SA. This is not the
fully qualified domain name of the Collector.
Component IP Address Specify the IP address of the Admin interface of the Collector
SA appliance.
Description (optional) Specify a description, for example location, business
unit, etc.
5. Click Save .
6. Register the Collector to CommandPost/K2. Click Register and accept the End User License
Agreement (EULA).
CommandPost/K2 will then communicate with the Collector at the specified IP address.
Link Collector to Fidelis Sensors
1. Log into the CommandPost/K2 user interface from a web browser.
2. Navigate to
System > Components
.
3. Select the appropriate Direct, Internal, or Mail sensor to expand its details and then click
Config .
4. In the left navigation, select the appropriate item for the sensor Direct , Internal , or Mail .
5. Click the Advanced or Metadata tab for the sensor.
6. In the Send metadata to collector list, select the Collector from the list.
7. Repeat for each Fidelis sensor.