Fidelis Common Criteria, Руководство по настройке

Страница: 5 / 25

Fidelis Network Common Criteria Configuration Guide Version 9.0.3 2 www.fidelissecurity.com
Enhanced Information for Chapter 2, Appendix A
and Appendix B of [1]
The sections below provide corrected information required to configure, monitor and maintain a working
system as certified by Common Criteria. These sections are based on the information in the
Enterprise
Setup and Configuration Guide [1], and are reproduced here in entirety with new or corrected information.
Chapter 2 Setup and Configure
Default Accounts and Initial Passwords
The information in this section applies to all appliances.
To access the appliance from the Linux command line, connect the appliance to a local keyboard and
monitor.
The Linux command line account and initial password for all appliances are:
Account Initial password How to reset
fidelis fidelispass
/usr/bin/passwd
K2 GUI account and initial password are:
Account Initial password How to reset
admin system Click user name at the
top of the GUI.
For iLO the user ID and password are on the unit’s label on top of the server. Once the user connects to
the iLO via a web browser, these credentials are needed. After logging in, the user ID and password can
be changed.
For
IMM account and initial password are:
Account Initial password How to reset
USERID PASSW0RD (with a zero,
not the letter O) Click Login Settings in
the left column of the
IMM GUI.
Important!
Ensure that you change the default password after the initial login. This can be performed in
the Configuration Wizard. Save the new password in a secure location so that you will have
access to accounts when needed.
Do not use the Linux command line account for normal system operation after initial setup
is complete. The account should only be used under the direction of Technical Support if
needed to determine the cause of system malfunction.
Only use the K2 GUI default account to run through the Configuration Wizard at initial setup.
The wizard will guide you through the creation of new user accounts and changing the
default password. Once user accounts are created, do not use the default account.