Manual ReadyServoTurn
© 2022 FichtelBahn®
Manual Version 1.0
Technical changes and errors reserved
Page 28
FichtelBahn
Line
R
eady
05.5 Extended start conditions of macros
In addition to the known start conditions
Execution from host
,
time
and
start behaviour
at module start
, a macro can be started from
the 4 inputs of the module.
To achieve this, the function “Start macros
from external input port” must be activated by
right-clicking on the module name.
Now the 4 inputs are permanently linked with
the 4 first macros. If input 0 changes state from
0 to 1, macro 0 is started.
The assignment is visible in the following table.
If the function is activated, all 4 dependancies
are created. If not all inputs are required for
this function, the macros affected must be left
without a function.
Input
Assigned macro
Input 0
macro
00
Input 1
macro
01
Input 2
macro
02
Input 3
macro
03
Please notice:
It is advisable to not to use macros 0 to 3 for normal se-
quences. The normal program sequence should start with
macro 4. If an input is required, a start instruction with
“Start macro X” can be add to macro 0 to 3.
