FIC CW0A1, Руководство пользователя

Страница: 5 / 110

N
otebouide
5
19. The risk of ignition caused by small metallic objects, such as paper clips or
staples, moving around inside TRANSPORTABLE EQUIPMENT during
transportation shall be reduced objects entering the equipment, please do
not remove dummy card from the product.
For Safety Regulation:
z
Risk of explosion if battery is replaced by an incorrect type.
z
For electrical safety concerns, only use telephone cables rated
26AWG or higher.
z
The Optical drive is a Class 1 Laser Product.
z
Li-Ion battery is vulnerable, do not charge it with other power
adapter, or it may cause fire or explosion.
z
For the power supply of this equipment,
An approved power cord has to be used.
Make sure the socket and any extension cord(s) you use can
support the total current load of all the connected devices.
Before cleaning the computer, make sure it is disconnected
from any external power supplies (i.e. AC adapter).
Installation Restrictions
1. Please read these safety instructions carefully.
2. If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
3. .Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electronic shock. Never spill liquid of any kind on the
product.
4. For electrical safety concerns, only use telephone cables rated 26AWG or
higher.