FIC CW0A1, Руководство пользователя

Страница: 40 / 110

M
ini-note User Guide
40
Replacing the Battery Pack
When your Mini-note estimates that the battery only has enough charge to
continue for a few minutes, it will alert you with a battery low warning beep. If
you are consuming a lot of power by using the audio system, and the hard disk
drives, your Mini-note might run out of charge much sooner than you expect.
You should always respond to the battery low indication by connecting to AC
power or turning off your Mini-note, or suspending your Mini-note to disk. If
you do not do so, the Mini-note will automatically suspend to disk and turn
off. The contents of the memory will store in the hard disk drive. You will be
unable to restart the Mini-note until you have connected to the AC adapter or
installed a charged battery. To replace the battery pack, refer to the previous
sections on "Installing the Battery Pack" and "Removing the Battery Pack."
For Window XP, the suspend mode (Hibernate or Standby) can be chosen
at Power Options of Windows's Control Panel)
Be sure to save your data before replacing the battery pack or connecting
the AC adapter. Failure to do so can result in data loss.
E
XTENDING
B
ATTERY
L
IFE
It is important to be aware of the simple things for extending the life of the
system main battery while you are on the road. You should find a working
place where the external lighting is not too bright and turn down the screen
brightness. Also, you can choose the available mode on the Power
Management item of the Control Panel in Windows.