4/12
Instructions for use WPM Repeater
Introduction
1
INTRODUCTION
1.1
Intended use
The WPM repeaters are used to extend the WPM system for areas where no press control is
required, but the monitoring of tools is to be carried out.
1.2
System requirements
The WPM repeaters are intended solely for use with the WPM cloud application. You need a
running WPM cloud application for operation.
The WPM cloud application must be accessible via port 8883.
The WPM repeater can be integrated either via WLAN or via LAN into the company network.
1.3
Autor's rights
The product WPM Repeater and these instructions are protected by copyright. Reproduction
without approval shall be prosecuted in court.
We reserve all rights to these instructions, including reproduction and/or copying in all imagin-
able forms, e.g. by photocopying, printing, copying to any data media whatsoever and in trans-
lated form.
These instructions may be reprinted only with written approval from FIBRO GMBH.
The technical state at the time of the delivery of the product WPM Repeater and the associated
instructions shall be decisive if no other information is provided.
We reserve the right to make technical changes without giving special notice. Earlier instructions
shall lose their validity. The general sales and delivery conditions of
FIBRO GMBH apply.
The products, names and logos mentioned serve informational purposes only and may be trade-
marks of the respective owner. This shall require no special indication.
