Fibreshop FS-VFL205, Руководство пользователя

Страница: 3 / 5

Chapter 1 Visual Fault Locator
NOTE: Please properly install the batteries. Switch in middle for power off,
switch up for CW output, switch down for glint output.
CAUTION: IMPROPERLY OPERATION WILL CAUSE A DEVICE DAMAGE!
ALWAYS MAKE SURE:
1. Do not use inferior fibre pigtail or patch cord.
2. The connector must be well polished.
3. Always VERTICALL Y insert and pull out the connector of fiber.
Otherwise, the ceramic tube may be broken.
Chapter 2 Test Show
Step 1: You can choose a continuous wave output mode for steady fault illumination or a
flashing output mode by pushing the switch up and down.
Step 2: Compact and intelligent design makes it a good assistance in locating breakpoints of a
fibre