Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 13 of 254
Example:
<CR><LF>+CSQ: 99,99<CR><LF>
<CR><LF>OK<CR><LF>
The unsolicited results code is same as the Results code.
Note:
The <CR> and <LF> characters are not explicitly presented in the response format in this
document.
To reduce the print length the empty line in actual response may be removed in the
examples.
2.6 Command Syntax
Execute command syntax
AT+xxx
ATxxx
ATxxx;
Parameter set command syntax
AT+xxx=<Value>
ATxxx=<Value>
Parameter read Command syntax
AT+xxx?
ATxxx?
Parameter test Command syntax
AT+xxx=?
ATxxx=?
<Value> consists of either a numeric constant or a string constant. <compound_value> consist of several
<value> parameters separated by commas.
Example of compound_value: <value1>, <value2>,…,<valueN>
Numeric Constants
Numeric constants are expressed in decimal, hexadecimal, or binary form. In the Modem, the definition
of each command specifies which form is used for values associated with that command.
String Constants
String constants consist of a sequence of characters, bounded at the beginning and end by the
double-quote character (").
3 Modem Information
These commands allow the user to query the type of device that is attached, the technology used in the
device, as well as basic operating information about the modem unit.
