http://www.fiberstars.com
79-15103-00 REV. B
Page 3 of 11
FCC WARNING
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
2.
Changes or modifications not expressly approved by Fiberstars Inc. could void the user's
authority to operate the equipment.
SAVE THESE INSTRUCTIONS!
ELECTRICAL RATINGS
Do not exceed the maximum electrical ratings of the WPC-04R. Install a 20Amp 120VAC Circuit
Breaker in the Breaker Panel for connection to the Time Clock Input. This Circuit Breaker is also
used for Light Input. Refer to pages 4 and 5 for installation instructions. Light circuit is rated for
8Amp 120VAC Max.
Basic safety precautions should be observed when operating the WPC-04R product and other
associated equipment.
1.
A qualified electrician must install the WPC-04R in accordance to the National and Local
Electrical Codes.
2.
The WPC-04R must not be less then 5 feet (3 meters in Canada) from inside edge of pool.
ONLY USE COPPER CONDUCTORS.
3.
Do not exceed the maximum ratings of individual components, wiring devices, and current
carrying capacity of conductors.
4.
For the bonding, grounding, installing, and wiring of underwater lights to the WPC-04R, refer to
Article 680 of the National Electrical Code or Article 68 of the Canadian Electrical Code.
5.
This device should never operate an equipment that could cause property damage, bodily injury,
or death should it be activated unexpectedly.
6.
Never allow children to operate the WPC-04R unsupervised.
IMPORTANT SAFETY INFORMATION