79-15167-00 REV. A
www.fiberstars.com
Page 8 of 10
FDS-PS REMOTE OPERATION INSTRUCTIONS
WIRELESS REMOTE OPERATION
The POWER ON/OFF buttons control the
individual unit with the corresponding circuits
independently. With each push of the button,
the FDS-PS toggles the individual units with
corresponding circuits from ON to OFF and
vice versa. For Synchronization operation,
simply push the SYNC ON/OFF button.
NOTE: If all circuits are off when the SYNC
ON/OFF button is pressed, all circuits will be
turned to ON. If any one of the circuits are in
the ON state by the wireless remote, then when
the SYNC ON/OFF button is pressed all
circuits will be turned OFF and the SYNC
ON/OFF must be pressed again to turn all
circuits ON simultaneously.
Circuit 1 control
Circuit 2 control
For Synchronization of
Circuit 1 and Circuit 2