FiberLamp
Hardware Setup
Page 4 of 20
Copyright 2015
5870082 A1
1
.
Product Overview
IMPORTANT SAFETY INFORMATION:
The FiberLamp FL5600 is a professional grade fiber optic LED luminaire. Only a licensed
professional should install this fixture
.
Before installing or powering the FL5600, read this manual and follow the safety
precautions listed below.
x
The FL5600 is for outdoor use only, do not expose to rain or moisture.
x
Supply only with power that complies with local building and electrical code with
voltage between 110-240VAC at 50-60Hz.
x
Never bypass electrical fuse on the fixture. Replace defective fuse with fuses only of
specified type and rating.
x
Do not attempt to modify the fixture.
x
Allow a minimum 2 inches of clearance from any vent opening on the fixture.
x
Install away from any location likely to gather dust and debris.
FL5600 Overview
The FiberLamp FL5600 is an LED based fiber optic luminaire that has dynamic color changing
abilities and an effect wheel. It can be controlled with manual, USB, and DMX512 interfaces.
The FL5600 is designed for use with both side and end-emitting fiber optics.
Models
The FL5600 is offered with a single colored light source or a multicolored light source. All models
can be equipped with a motorized “twinkle wheel” for use with bundled strands of fiber.
COLOR OPTIONS
Multicolor options are offered as RGBW (Red, Green, Blue, 5000K White) or RGBA (Red, Green,
Blue, Amber). An FL5600 with a multicolored light source is the best option when color-changing
abilities are required.
Single color options are offered in 2800K, 3000K, 4200K, 4400K, 5000K and 6500K white color
temperatures. An FL5600 with a single colored light source is the best option when high light
intensity is required.
FIBER INSTALLATION PORT OPTIONS
The FL5600 is offered with a standard 30mm or a custom 33mm fiber installation port.
Accessories ACS30 and ACS33 are offered to couple bundles of up to 1200 fibers in the same
common end.
