Technical passport / OTM-1550
12-2016-v4
This command configures the Ethernet parameters, including IP address, subnet mask
nd gateway. You can refer to the help information for its using.
and 255.255.255.255 don’t exist. SNMP Trap does not send to
ese two addresses.
only and read-write are both “public” as the
quipment default setting from factory.
his command is used to modify the login password.
his command is used to
set the logo and equipment model.
his command is used to log out.
a
settrap
This command shows or modifies the aim host IP address list of the SNMP Trap,
IP address of 0.0.0.0
th
community
This command configures the read-only group name and read-write group name.
“Group name” is the concept of SNMP agreement like the password. Use the
command “community ro” to configure the read-only, and “community rw” for the
read-write. For example, input “community rw public”, “public” is the read-write
group name. The group name for read-
e
setpswd
T
entplogo
T
Exit
T
