Operating Instructions
Hand crimp tool PEW 9.1128
Rev.: 2014-06-02
5 / 5
EN
6 Warranty
The hand crimp tool is subjected to a thorough quality control process.
General warranty conditions apply.
7 Service and maintenance
Before starting work, ensure that the hand crimp tool is clean and in proper working order.
Crimping residue must be removed. Joints should be regularly oiled with a light mineral oil and
protected against contamination. It must be ensured that all bolts are secured by means of
securing rings. As a rule, all repairs to the wire end ferrule crimping tool must be performed
by the tool manufacturer or an authorised service centre. Please contact the dealer where
you purchased your tool.
