- 26 -
Warnings!
Do not store splicer in any area where temperature and humidity are
extremely high. Possible equipment failure may result.
Do not touch protection sleeve or tube-heater during heating or
immediately after completion of heating.
Their surfaces are very hot and touching these may result in burn.
The splicer is precision adjusted and aligned. Do not allow the unit to
receive a strong shock or impact. Possible equipment failure may result.
Use supplied carrying case for transportation and storage.
The carrying case protects the splicer from damage, moisture, vibration
and shock during storage and transportation.
Do not use any chemical other than pure alcohol (99% or greater) to clean
the objective lens, V-groove, mirror, LCD monitor, etc., of the splicer.
Otherwise blurring, discoloration, damage or deterioration may result.
The equipment must be repaired or adjusted by a qualified technician or
engineer. Incorrect repair may cause fire or electric shock.
Should any problems arise, please contact your nearest sales agency.
▶
Symbol means “Pay attention”.
▶
Pay attention to hot surface!
▶
Symbol means “Must do not”.
▶
You must not disassemble!
▶
You must disconnect a plug!
