![FIBARO FGBHCD-001 Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/fibaro/fgbhcd-001/fgbhcd-001_operating-manual_2286458010.webp)
10
BATTERY
#8: Battery
Checking battery level:
The CO Sensor measures battery level every 6 hours and reports it to
your iOS device. Additionally, if battery level is below 15%, the acces-
sory will report low level battery status to your iOS device and indi-
cate it with one yellow blink and a short beep.
Replacing the battery:
1. Remove the accessory from the cover by turning it counter-
clockwise.
2. Pull the paper strip to take out the battery.
3. Press and hold the button for at least one second.
4. Insert a new CR123A battery observing the polarities shown
inside.
5. Attach the accessory to its cover by turning it clockwise and
perform the test (as decribed in #5: Operating the device).
CAUTION
using batteries other
than specified may
result in explosion.
Dispose of properly,
observing environ-
mental protection
rules.
!
FIBARO CO Sensor can be powered with CR123A (included) battery.
Estimated battery life with accessory on default settings is 3 years
(tested with Panasonic Industrial Lithium).
CAUTION
use only type of bat-
tery specified in this
manual and keep
proper polarity!
!