Fiat DOBLO 2016, Руководство пользователя

Страница: 76 / 298

Adjusting the vehicle
interior lighting (ILLU)
This function is available, with the
dipped headlamps on and at night, to
adjust the brightness of the instrument
panel, buttons, sound system display
and automatic climate control display.
During the daytime, and with the
dipped headlamps on, the instrument
panel, buttons and sound system
and automatic climate control displays
are set to maximum brightness.
press the MENU button briefly:
the display will show the wording ILLU;
press button and to set the
required brightness level;
press the MENU button briefly
to return to the menu screen or hold
the button down to return to the
standard screen without storing.
Setting a speed limit
(SPEEd)
This function is used to set a speed
limit (km/h or mph); the driver is alerted
when this limit is exceeded (see
“Warning lights and messages”).
To set the desired speed limit, proceed
as follows:
- press the
MENU button briefly:
the display will show the wording
(SPEED) and the unit (km/h) or (mph)
previously set;
- press or to select speed limit
activation (On) or deactivation (Off);
- if the function is on, press
or to
select the required speed limit and then
press
MENU to confirm;
NOTE The speed may be set in the
range from 30 to 200 km/h, or from 20
to 125 mph according to the previously
chosen unit (see “Setting the distance
unit”) described below. The setting
will increase/decrease by five units each
time the
/ button is pressed. Hold
down the / button to automatically
increase/decrease the setting rapidly.
Complete the adjustment with single
presses of the button when you
approach the desired value.
- press the
MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
To cancel the setting, proceed as
follows:
- briefly the press
MENU button;
(On) will flash on the display;
- press the
button; (Off) will flash on
the display;
- press the
MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Setting the clock (Hour)
With this function, it is possible to set
the time.
To adjust, proceed as follows:
- briefly press the
MENU button;
the “hours” will flash on the display;
- press the
or button to adjust;
- briefly press the MENU ESC
button; the “minutes” will flash on
the display;
- press the
or button to adjust;
- press the MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Setting the distance unit
(Unit)
With this function it is possible to set
the unit.
To adjust, proceed as follows:
- press the
MENU button briefly:
the display will show the wording (Unit)
and the previously set unit (km) or (mi);
- press
or to select the required
unit.
- press the
MENU button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
72
KNOWING
THE
INSTRUMENT
P
ANEL