Fiat DOBLO 2015, Руководство пользователя

Страница: 105 / 244

103
STARTING THE
ENGINE
The vehicle is fitted with an electronic
engine lock device: if the engine fails
to start, see the paragraph “The Fiat
CODE system” in section “Know your
vehicle”.
20) 21)
91)
PROCEDURE FOR
PETROL VERSIONS
Proceed as follows:
engage the handbrake;
put the gear lever into neutral;
fully depress the clutch pedal,
without touching the accelerator;
turn the ignition key to AVV and
release it as soon as the engine starts.
PROCEDURE FOR
DIESEL VERSIONS
Proceed as follows:
engage the handbrake;
put the gear lever into neutral;
turn the ignition key to MAR: the
warning lights and on the
instrument panel will turn on;
wait for the warning lights and
to switch off. The hotter the engine is,
the quicker this will happen;
fully depress the clutch pedal,
without touching the accelerator;
turn the ignition key to AVV as soon
as warning light switches off.
Waiting too long will waste the heating
work carried out by the plugs. Release
the key as soon as the engine starts.
22)
PROCEDURE FOR
NATURAL POWER
VERSIONS
The engine always starts up on petrol
independently of the previously
selected mode.
PROCEDURE
FOR VERSIONS
WITH DUALOGIC™
TRANSMISSION
The system allows the engine to be
started both with a gear engaged and
with the transmission in neutral ( N ).
Always press the brake pedal with the
gear engaged.
It is advisable to place the gear lever in
neutral ( N ) before starting the engine.
WARNING With cold engine, the
accelerator must be entirely released
when turning the ignition key to position
AVV. If the engine does not start at the
first attempt, return the ignition key to
STOP before repeating the starting
procedure. If, when the ignition key is
at MAR the
warning light remains lit,
turn the key to STOP and then back to
MAR; if the warning light remains lit, try
with the other keys provided with the
car. If you still cannot start the engine,
contact a Fiat Dealership.
23)
WARMING UP THE
ENGINE JUST AFTER IT
HAS STARTED
Proceed as follows:
drive off slowly, letting the engine
turn at medium revs. Do not accelerate
abruptly;
do not demand full performance at
first.
Wait until the engine coolant
temperature gauge starts moving.
EMERGENCY START-UP
If the instrument panel warning light
stays on steadily, you can perform
an emergency start by using the code
on the CODE card (see the "In an
emergency" section).
24)
STOPPING THE ENGINE
Turn the ignition key to STOP while the
engine is idling.