Fiat 500X 2019, Руководство пользователя

Страница: 28 / 468

NOTE: To avoid unintentional shut downs, the system will
disable the one time push of the remote start button for two
seconds after receiving a valid remote start request.
To Exit Remote Start Mode And Drive The Vehicle
Before the end of 15-minute cycle, push and release the
unlock button on the key fob to unlock the doors, or unlock
the vehicle using Keyless Enter-N-Go — Passive Entry via
the door handles, and disarm the vehicle security alarm (if
equipped). Then, prior to the end of the 15-minute cycle,
push and release the START/STOP button.
NOTE: For vehicles equipped with the Keyless Enter-
N-Go — Passive Entry feature, the message “Remote Start
Active — Push Start Button” will display in the instrument
cluster display until you push the ignition START button.
Remote Start Comfort Systems — If Equipped
When Remote Start is activated, the heated steering wheel
and driver heated seat features will automatically activate
when ambient temperature is less than 40° F (4.4° C). These
features will stay on through the duration of Remote Start
or until the ignition switch is cycled to the RUN position.
Refer to
⬙
Uconnect Settings
⬙
in
⬙
Multimedia
⬙
for further
information.
Remote Start Windshield Wiper De–Icer And Rear
Defrost Activation — If Equipped
When remote start is active and the outside ambient
temperature is less than 40°F (4.4°C), the Windshield Wiper
De-Icer and the Rear Defrost will be enabled. Exiting
remote start will resume previous operation, except if the
Windshield Wiper De-Icer is active. The Windshield Wiper
De-Icer timer and operation will continue.
Refer to
⬙
Uconnect Settings
⬙
in
⬙
Multimedia
⬙
for further
information.
General Information
The following regulatory statement applies to all radio
frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
26 GETTING TO KNOW YOUR VEHICLE