Fiat 500L 2018, Руководство пользователя

Страница: 89 / 180

Activation:
Rotate the selector and hold in this position for
approximately half of a second, the corresponding
LED will light up and “T” mode indicator
appears on the display with a dedicated message
.
Deactivation:
To "Normal" mode, rotate the mode selector
counterclockwise and hold in this position for half
a second
. The LED corresponding to “Normal”
mode will light up and the “T” mode
deactivation indication will appear in the display
.
NOTE:
If “T” or “Normal” mode was active
when the engine was stopped, the next time it is
started the mode that was selected will be
reactivated
.
“Gravity Control” Function
This function allows for a constant vehicle speed
to be maintained while travelling downhill
.
Noise
and vibrations coming from the brakes when the
system is activated are normal
.
To activate the
system reach a speed slower than 15 mph
(25 km/h)
. After reaching the desired speed,
release the accelerator and brake pedals com-
pletely
.
If you want to increase/decrease the
speed, press the accelerator/brake pedals again
NOTE:
System intervention set-up can only be engaged
with "T" mode activated
.
Activation:
With "T" mode on, rotate the selector
clockwise and hold in this position for half a
second, until the corresponding LED lights up and
“Gravity Control” functionality appears on the
display with a dedicated message
.
Deactivation:
To deactivate the "Gravity Control" functionality
rotate the selector counterclockwise and hold in
this position for half a second
. The LED corre-
sponding to “Gravity Control” functionality will
shut off and the “Gravity Control” functionality
deactivation indication will appear on the display
.
NOTE:
• To prevent engine stalling do not use the system
if the transmission is in NEUTRAL .
• The system is available when the speed be-
tween 4 mph (7 km/h) and 15 mph (25 km/h)
.
• The Gravity Control system must be used with
a gear that is suitable for the set speed, in order
to prevent possible engine stalling
.
While the
Gravity Control system is operating it is also
possible to take control of the vehicle again by
pressing the brake and accelerator pedals
.
If the
Gravity Control is not available when system
intervention set-up is engaged, this could be due
to brake overheating
. If this happens, wait for a
few minutes .
• If the braking system overheats the system will
deactivate through a gradual release of the
braking pressure, leaving vehicle control to the
driver
. Deactivation of the Gravity Control
system is accompanied by flashing of the warn-
ing light, by a dedicated message in the display
and an acoustic warning
. To reactivate the
system intervention set-up wait for the system
to cool down and turn the selector again
.
• If the speed exceeds 15 mph (25 km/h) and is
below 31 mph (50 km/h), the Gravity Control
system intervention set-up is deactivated but is
ready for being reactivated when the speed
drops back below 15 mph (25 km/h)
.
The
indicator in the instrument panel turns off and
87