Enhanced Accident Response System Reset
Procedure
After the event occurs, when the system is active,
a message regarding fuel cutoff is displayed
.
Turn
the ignition switch from ignition AVV/START or
MAR/ACC/ON/RUN to ignition STOP/OFF/
LOCK
.
Carefully check the vehicle for fuel leaks in
the engine compartment and on the ground near
the engine compartment and fuel tank before
resetting the system and starting the engine
.
Depending on the nature of the event the left
and right turn signal lights, located in the instru-
ment panel, may both be blinking and will con-
tinue to blink
.
In order to move your vehicle to
the side of the road, you must follow the system
reset procedure
.
Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two sec-
onds
1
.
Turn ignition STOP/
OFF/LOCK
.
(Turn Sig-
nal Must be placed in
Neutral State)
.
Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two sec-
onds
2
.
Turn ignition MAR/
ACC/ON/RUN
.
Right turn light
BLINKS
.
Left turn light is OFF
.
3
.
Turn right turn signal
switch ON
.
Right turn light is ON
SOLID
.
Left turn light BLINKS
.
4
.
Place turn signal in
neutral state
.
Right turn light is OFF
.
Left turn light BLINKS
.
5
.
Turn left turn signal
switch ON
.
Right turn light
BLINKS
.
Left turn light is ON
SOLID
.
6
.
Place turn signal in
neutral state
.
Right turn light
BLINKS
.
Left turn light is OFF
.
7
.
Turn right turn signal
switch ON
.
Right turn light is ON
SOLID
.
Left turn light BLINKS
.
8
.
Place turn signal in
neutral state
.
Right turn light is OFF
.
Left turn light BLINKS
.
Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two sec-
onds
9
.
Turn left turn signal
switch ON
.
Right turn light is ON
SOLID
.
Left turn light is ON
SOLID
.
10
.
Turn left turn signal
switch OFF
.
(Turn Sig-
nal Switch Must be
placed in Neutral
State)
.
Right turn light is OFF
.
Left turn light is OFF
.
11
.
Turn ignition STOP/
OFF/LOCK
.
12
.
Turn ignition MAR/
ACC/ON/RUN
.
(Entire
sequence needs to be
completed within one
minute or sequence
will need to be re-
peated)
.
System is now reset
and the engine may be
started
.
Turn hazard flashers
OFF (Manually)
.
SAFETY
68
Содержание 500L 2018
